Scientific paper ID 1242 : 2015/3
DIGITAL MEASURING OF TRACTION AND RECUPERATIVE CURRENT IN THE SERBIAN RAILWAYS ELECTRO-TRACTION SUBSTATIONS
Gavrilovic S. Branislav, Bundalo Zoran, Vukadinovic Vojislav, Popovic Zdenka
This paper deals with construction of device for real-time analysis of traction and recuperative current. The sensing device constructed through utilization of modern microprocessor unit and thus representing full digital system for real time analysis of current spectrum of power semiconductor converter. Content of higher harmonics in these currents must not exceed limits specified in international standard EN 50160, so exact measurement and analysis of this harmonics is necessary. Proposed device uses microprocessor for real time measurement and analysis of traction and recuperative currents. The paper suggests one of the possible modern solutions to the measurement and supervision of traction and recuperative currents in railways electro-traction substations of “Serbian Railways”.
микропроцесор изчислителни методи пробно изследванеmicroprocessor computational methods experimental verificationGavrilovic S. Branislav Bundalo Zoran Vukadinovic Vojislav Popovic Zdenka
 Davídek D., Laipert M, Vlček M., “Analog and digital filters”, Nakladatelství ČVUT, 2006.
 Mohan N., Undeland T., Robbins W., “Power Electronics: Converters, Applications and Design”. John Wiley & Sons, 1995.
 K. M. Mougdalya, “Digital Control”. John Wiley & Sons Ltd., London, 2007.
 Oppenheim A., Schafer R., Buck J, “Discrete – Time Signal Processing". Prentice Hall, 1999.
 Petrovas P, Lisauskas S., Rinkeviciene R, “Digital Automatic Control System with PID Controller”, Electronics and Electrical Engineering, no 5. , 2009, pp. 13–16.