SUSTAINABLE TRANSPORT AND MOBILITY: A MULTIDISCIPLINARY ISSUE

Patrick Millot

Scientific paper ID 900 : 2013/3

SUSTAINABLE TRANSPORT AND MOBILITY: A MULTIDISCIPLINARY ISSUE

Patrick Millot

Nowadays sustainable transports must achieve multiple challenges: energy, environment, safety and reliability. This papergives some examples of research led at the University of Valenciennes (France) in the transport and mobility domain and of the research and development environment of our labs at the regional level as well as the French national and European levels. Illustrations focus on particularly critical issues linked to the presence of human being in the system, as passenger or as driver involved in the control loop. Related courses in that domain then transpose the researchresults for “licence” and master programs. An international syllabus dedicated to transport is also proposed in the course of an Engineering School.

• Reload article • Open/Download as PDF

Устойчив транспорт енергия безопасност надежност човешки фактор сътрудничество човек-машина хора с увреждания среда на изследователска и развойна дейност курсове.Sustainable transport energy safety reliabilityhuman in the loop human-machine Patrick Millot

BIBLIOGRAPHY

[1] see: http://www.univ-valenciennes.fr/

[2] Bernard J., Delprat S., Buechi F., Guerra T-M. (2009). Fuel-Cell Hybrid Powertrain: Toward Minimization of Hydrogen Consumption. IEEE Transactions on Vehicular Technology, 58 (7), pp. 3168-3176.

[3] Pellé J., HarmandS. (2009). Heat Transfer Study in a Rotor Stator System Air Gap with an AxialInflow. Applied Thermal Engineering, 29(8-9), pp. 1532-1546.

[4] Keirsbulck L., Labraga L., Gad-el-Hak M. (2012). Statistical Properties of Wall-Shear-StressFluctuations in Turbulent Channel Flows. International Journal of Heat and Fluid Flow, 37,doi: 10.1016/j.ijheatfluidflow.2012.04.004, pp. 1-8.

[5] Epee A., Lauro F., Bennani B., Bourel B. (2011). Constitutive model for a semi-crystalline polymerunder dynamic loading.International Journal of Solids and Structures, 48(10), pp. 1590-1599, ISSN0020-7683.

[6] Polet P., Vanderhaegen F., Millot P. (2009). Human Behaviour Analysis of Barrier Deviations Usinga Benefit-Cost-Deficit Model. Advances in Human-Computer Interaction, 2009, pp. 10-19.

[7] Vanderhaegen F., Polet P., Zieba. (2009). A reinforced iterative formalism to learn from humanerrors and uncertainty. Engineering Applications of Artificial Intelligence, 22 (4-5), pp. 654-659, ISSN0952-1976.

[8] Auberlet J-M., Pacaux-Lemoine M-P., Anceaux F., Plainchaud P., Rosey F. (2010). The impact of perceptual treatments on lateral control: A study using fixed-base and motion-base drivingsimulators. Accident Analysis and Prevention, 42, pp. 166-173, ISSN: 00014575

[9] Coeugnet S., Anceaux F., Charron C., Naveteur J. (2011). Waiting behind the wheel: anexperimental study of impatience in car drivers.International conference on Driver Behavior Training,Paris, November.

[10] Haut-DubrulleA., Robache F., Pacaux-Lemoine M-P., Morvan H. (2011). Determination ofpre-impact occupant postures and analysis of consequences on injury outcome. Part I: A driving simulatorstudy. Accident Analysis and Prevention, 43(1), pp. 66-74, ISSN 0001-4575.

[11] Haut-Dubrulle A., Robache F., Drazetic P., Guillemot H., Morvan H. (2011). Determinationof pre-impact occupant postures and analysis of consequences on injury outcome. Part II:Biomechanicalstudy. Accident Analysis and Prevention, 43(1), pp. 75-81, ISSN 0001-4575.

[12]Liu H., Niar S., Elhillali Y., Rivenq-Menhaj A. (2011). Embedded Architecture with HardwareAccelerator for Target Recognition in Driver Assistance Systems.ACM SIGARCH Computer ArchitectureNews (ACM CAN), ISSN 0-89791-534-8.

[13] Melki A., Hammadi S., Sallez Y., Berger T., Tahon C. (2010). Advanced approach for the publictransportation regulation system based on Cybercars. RAIRO - Operations Research, 44, pp.85-105.

[14] Billot M., Simoneau É., Martin A., VanHoecke J. (2010). Age-related relative increases inelectromyography activity and torque according to the maximal capacity during upright standing.European Journal of Applied Physiology, 109 (4), pp. 669-680, ISSN: 1439-6319

[15] Pudlo P., Lempereur M., Gorce P., Lepoutre F-X. (2009). A new method for simulating the carenteringmovement. International Journal of Vehicle Design (IJVD)-special issue on digital human modelingand simulation, and applications in vehicle design, 51 (3/4), pp. 341-358.

[16] SentouhC., Debernard S., PopieulJ-C., VanderhaegenF. (2010). Toward a Shared LateralControl Between Driver and Steering Assist Controller.11th IFAC/IFIP/IFORS/IEA International Conference on Analysis,Design, and Evaluation of Human-Machine Systems, Valenciennes, France, September.

[17] Millot, P. and Kamoun, A. (1988). “An implicit method for dynamic task allocation between man and computer in supervision posts of automated processes”, In proceedings of IFAC/IFIP/IEA/IFORS Symposium on Analysis Design and Evaluation of Man Machine Systems, pp 77-82, Oulu, Finland, June.

[18] Millot P., Hoc JM., (1997). Human-Machine Cooperation: Metaphor or possible reality? Proceedings of the 2nd European Conference on Cognitive Science ECCS’97, pp165-174. Manchester, U.K.

[19] Millot P.,(1998). ”Concepts and limits for human machine cooperation”, IEEE SMC CESA 98, Computational Engineering in System Application Conference, Hammamet, Tunisia, April.

[20] Millot P., DebernardS. ,Vanderhaegen F. (2011).Authority and cooperation between humans and machines.In G.Boy (Ed), Handbook for Human-Machine Interaction.Ashgate Publishing Ltd, Wey Court East, Union Road, Farnham, Surrey, GU9 7PT, England.

[21] Millot P., Pacaux-Lemoine MP. (2013). A Common Work Space for a mutual enrichment of Human-machine Cooperation and Team-Situation Awareness. 12th IFAC/IFIP/IFORS/IEA Symposium Analysis Design and Evaluation of Human Machine Systems, Las Vegas Nevada,USA, August 11-15.

[22] see: http://www.cisit.org/

[23] see: https://www.gis-3sgs.fr/

[24] see: http://www.univ-valenciennes.fr/ensiame/