IDENTIFYING THE CHANGE OF ALLOYING ELEMENTS IN HEAT-RESISTANT STEELS ON THE PROPERTIES OF NITRIDED LAYERS

Nikolay Tonchev	Iliya Zyumbilev	Velichko Machev	Valentin Gaidarov

Scientific paper ID 2443 : 2023/3

IDENTIFYING THE CHANGE OF ALLOYING ELEMENTS IN HEAT-RESISTANT STEELS ON THE PROPERTIES OF NITRIDED LAYERS

Nikolay Tonchev Iliya Zyumbilev Velichko Machev Valentin Gaidarov

The influence of chromium, molybdenum, tungsten, vanadium and silicon on the wear resistance and hardness after nitriding of heat-resistant steels ВН11 and ВН21 was examined. Additionally, the influence of alloying elements on the thickness of the bonded zone and the nitrided layer is considered. The analysis was performed through the process of modeling and optimization. Mutually acceptable modes common to steels of the class are defined.

• Reload article • Open/Download as PDF

йонно азотиране топлоустойчиви инструментални стомани моделиране идентификация на свойствата оптимизация DEFMOTion nitriding heat resistant tool steels modeling property identification optimization DEFMOT.Nikolay Tonchev Iliya Zyumbilev Velichko Machev Valentin Gaidarov

BIBLIOGRAPHY

[1] Muzahem Khalaf M. M., Modeling of the Case Depth and Surface Hardness of Steel During Ion Nitriding, Eastern-European Journal Of Enterprise Technologies, 2 (5 (80)), 45-49, 2016 doi: http://doi.org/10.15587/1729-4061.2016.6545... 2020.

[2] W. Möller, S. Parascandola, T. Telbizova, R. Günzel, E. Richter, Surface processes and diffusion mechanisms of ion nitriding of stainless steel and aluminium, Institute of Ion Beam Physics and Materials Research, Forschungszentrum, 2000.

[3] Erdinc Kaluc, Structural surface characterization of ion nitrided AISI 4340 steel Sule Yildiz Sirin, Vocational School of Asim Kocabiyik, Kocaeli University, 41800 Hereke-Kocaeli,2011.

[4] V Tomala, T Hirsch - Microstructure, and residual stresses of a plasma-nitrided M2 tool steel, IWT, Bremen, Germany, 1999

[5] Tontchev, N., Materials science, Effective solutions, and technological variants, Lambert, Academic Publishing, 2014, 142 р ,

[6] Tontchev, N., Gaydarov, V., N. Hristov, N., Analyzes and applications through the computational approach DEFMOT, Sofia, 2022, 167 p. (in Bulgarian)

[7] Machev V. V. Georgiev N. Tontchev, I. Zumbilev, Identification of Surface Properties of Steel BН11 Depending on the Conditions of Ionic Nitriding, 2023, AJ MTC, (in print)

[8] Zumbilev A.P., Zumbilev I.A. Ionic nitriding and carbonitriding of steels, 2020, 325р, ISBN: 978-619-236-187-7 (in Bulgarian)

[9] Vuchkov, I., L. Boyadjieva, Quality Improvement with Design of Experiments. A Response Surface Approach, 2001.

[10] Stoyanov, S.K. Methods and algorithms for fast convergence. Sofia: Thesis for D Sc, Chemical Technology and Metallurgy, 1990 (In Bulgarian).